# Created by
# /usr/bin/cfgmaker --global 'workdir: /var/www/mrtg/routeur/' --output /etc/mrtg/routeur.cfg public@routeur.m-ripoll.com
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
workdir: /var/www/mrtg/routeur/
######################################################################
# System: Linksys
# Description: Linux 2.4.33-pre2 #775 Tue May 16 20:13:17 CEST 2006 mips
# Contact: root
# Location: Smh
######################################################################
### Interface 1 >> Descr: 'lo' | Name: '' | Ip: '127.0.0.1' | Eth: '' ###
### The following interface is commented out because:
### * it is a Software Loopback interface
#
# Target[routeur.m-ripoll.com_1]: 1:public@routeur.m-ripoll.com:
# SetEnv[routeur.m-ripoll.com_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo"
# MaxBytes[routeur.m-ripoll.com_1]: 1250000
# Title[routeur.m-ripoll.com_1]: Traffic Analysis for 1 -- Linksys
# PageTop[routeur.m-ripoll.com_1]:
Traffic Analysis for 1 -- Linksys
#
#
#
# System: |
# Linksys in Smh |
#
#
# Maintainer: |
# root |
#
#
# Description: |
# lo |
#
#
# ifType: |
# softwareLoopback (24) |
#
#
# ifName: |
# |
#
#
# Max Speed: |
# 1250.0 kBytes/s |
#
#
#
# Ip: |
# 127.0.0.1 (localhost) |
#
#
#
#
### Interface 2 >> Descr: 'teql0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
### * has a speed of 0 which makes no sense
#
# Target[routeur.m-ripoll.com_2]: 2:public@routeur.m-ripoll.com:
# SetEnv[routeur.m-ripoll.com_2]: MRTG_INT_IP="" MRTG_INT_DESCR="teql0"
# MaxBytes[routeur.m-ripoll.com_2]: 0
# Title[routeur.m-ripoll.com_2]: Traffic Analysis for 2 -- Linksys
# PageTop[routeur.m-ripoll.com_2]: Traffic Analysis for 2 -- Linksys
#
#
#
# System: |
# Linksys in Smh |
#
#
# Maintainer: |
# root |
#
#
# Description: |
# teql0 |
#
#
# ifType: |
# Other (1) |
#
#
# ifName: |
# |
#
#
# Max Speed: |
# 0.0 Bytes/s |
#
#
#
#
### Interface 3 >> Descr: 'eth0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is operationally DOWN
### * has a speed of 0 which makes no sense
#
# Target[routeur.m-ripoll.com_3]: 3:public@routeur.m-ripoll.com:
# SetEnv[routeur.m-ripoll.com_3]: MRTG_INT_IP="" MRTG_INT_DESCR="eth0"
# MaxBytes[routeur.m-ripoll.com_3]: 0
# Title[routeur.m-ripoll.com_3]: Traffic Analysis for 3 -- Linksys
# PageTop[routeur.m-ripoll.com_3]: Traffic Analysis for 3 -- Linksys
#
#
#
# System: |
# Linksys in Smh |
#
#
# Maintainer: |
# root |
#
#
# Description: |
# eth0 |
#
#
# ifType: |
# ethernetCsmacd (6) |
#
#
# ifName: |
# |
#
#
# Max Speed: |
# 0.0 Bytes/s |
#
#
#
#
### Interface 4 >> Descr: 'imq0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
### * has a speed of 0 which makes no sense
#
# Target[routeur.m-ripoll.com_4]: 4:public@routeur.m-ripoll.com:
# SetEnv[routeur.m-ripoll.com_4]: MRTG_INT_IP="" MRTG_INT_DESCR="imq0"
# MaxBytes[routeur.m-ripoll.com_4]: 0
# Title[routeur.m-ripoll.com_4]: Traffic Analysis for 4 -- Linksys
# PageTop[routeur.m-ripoll.com_4]: Traffic Analysis for 4 -- Linksys
#
#
#
# System: |
# Linksys in Smh |
#
#
# Maintainer: |
# root |
#
#
# Description: |
# imq0 |
#
#
# ifType: |
# Other (1) |
#
#
# ifName: |
# |
#
#
# Max Speed: |
# 0.0 Bytes/s |
#
#
#
#
### Interface 5 >> Descr: 'imq1' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is administratively DOWN
### * it is operationally DOWN
### * has a speed of 0 which makes no sense
#
# Target[routeur.m-ripoll.com_5]: 5:public@routeur.m-ripoll.com:
# SetEnv[routeur.m-ripoll.com_5]: MRTG_INT_IP="" MRTG_INT_DESCR="imq1"
# MaxBytes[routeur.m-ripoll.com_5]: 0
# Title[routeur.m-ripoll.com_5]: Traffic Analysis for 5 -- Linksys
# PageTop[routeur.m-ripoll.com_5]: Traffic Analysis for 5 -- Linksys
#
#
#
# System: |
# Linksys in Smh |
#
#
# Maintainer: |
# root |
#
#
# Description: |
# imq1 |
#
#
# ifType: |
# Other (1) |
#
#
# ifName: |
# |
#
#
# Max Speed: |
# 0.0 Bytes/s |
#
#
#
#
### Interface 6 >> Descr: 'eth1' | Name: '' | Ip: '' | Eth: '00-1d-7e-43-b5-ca' ###
Target[routeur.m-ripoll.com_6]: 6:public@routeur.m-ripoll.com:
SetEnv[routeur.m-ripoll.com_6]: MRTG_INT_IP="" MRTG_INT_DESCR="eth1"
MaxBytes[routeur.m-ripoll.com_6]: 1250000
Title[routeur.m-ripoll.com_6]: Traffic Analysis for 6 -- Linksys
PageTop[routeur.m-ripoll.com_6]: Traffic Analysis for 6 -- Linksys
System: |
Linksys in Smh |
Maintainer: |
root |
Description: |
eth1 |
ifType: |
ethernetCsmacd (6) |
ifName: |
|
Max Speed: |
1250.0 kBytes/s |
### Interface 7 >> Descr: 'vlan0' | Name: '' | Ip: '' | Eth: '' ###
Target[routeur.m-ripoll.com_7]: 7:public@routeur.m-ripoll.com:
SetEnv[routeur.m-ripoll.com_7]: MRTG_INT_IP="" MRTG_INT_DESCR="vlan0"
MaxBytes[routeur.m-ripoll.com_7]: 1250000
Title[routeur.m-ripoll.com_7]: Traffic Analysis for 7 -- Linksys
PageTop[routeur.m-ripoll.com_7]: Traffic Analysis for 7 -- Linksys
System: |
Linksys in Smh |
Maintainer: |
root |
Description: |
vlan0 |
ifType: |
ethernetCsmacd (6) |
ifName: |
|
Max Speed: |
1250.0 kBytes/s |
### Interface 8 >> Descr: 'vlan1' | Name: '' | Ip: '82.67.65.171' | Eth: '00-1d-7e-43-b5-c9' ###
Target[routeur.m-ripoll.com_8]: 8:public@routeur.m-ripoll.com:
SetEnv[routeur.m-ripoll.com_8]: MRTG_INT_IP="82.67.65.171" MRTG_INT_DESCR="vlan1"
MaxBytes[routeur.m-ripoll.com_8]: 1250000
Title[routeur.m-ripoll.com_8]: Traffic Analysis for 8 -- Linksys
PageTop[routeur.m-ripoll.com_8]: Traffic Analysis for 8 -- Linksys
System: |
Linksys in Smh |
Maintainer: |
root |
Description: |
vlan1 |
ifType: |
ethernetCsmacd (6) |
ifName: |
|
Max Speed: |
1250.0 kBytes/s |
Ip: |
82.67.65.171 (mail.m-ripoll.com) |
### Interface 9 >> Descr: 'sit0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is operationally DOWN
### * has a speed of 0 which makes no sense
#
# Target[routeur.m-ripoll.com_9]: 9:public@routeur.m-ripoll.com:
# SetEnv[routeur.m-ripoll.com_9]: MRTG_INT_IP="" MRTG_INT_DESCR="sit0"
# MaxBytes[routeur.m-ripoll.com_9]: 0
# Title[routeur.m-ripoll.com_9]: Traffic Analysis for 9 -- Linksys
# PageTop[routeur.m-ripoll.com_9]: Traffic Analysis for 9 -- Linksys
#
#
#
# System: |
# Linksys in Smh |
#
#
# Maintainer: |
# root |
#
#
# Description: |
# sit0 |
#
#
# ifType: |
# Encapsulation Interface (131) |
#
#
# ifName: |
# |
#
#
# Max Speed: |
# 0.0 Bytes/s |
#
#
#
#
### Interface 10 >> Descr: 'br0' | Name: '' | Ip: '192.168.1.254' | Eth: '' ###
Target[routeur.m-ripoll.com_10]: 10:public@routeur.m-ripoll.com:
SetEnv[routeur.m-ripoll.com_10]: MRTG_INT_IP="192.168.1.254" MRTG_INT_DESCR="br0"
MaxBytes[routeur.m-ripoll.com_10]: 1250000
Title[routeur.m-ripoll.com_10]: Traffic Analysis for 10 -- Linksys
PageTop[routeur.m-ripoll.com_10]: Traffic Analysis for 10 -- Linksys
System: |
Linksys in Smh |
Maintainer: |
root |
Description: |
br0 |
ifType: |
ethernetCsmacd (6) |
ifName: |
|
Max Speed: |
1250.0 kBytes/s |
Ip: |
192.168.1.254 (routeur.m-ripoll.com) |