# Created by # /usr/bin/cfgmaker --global 'WorkDir: /var/www/html/mrtg/routeur' --global 'Language: french' --global 'Options[_]: bits,growright' --ifdesc=descr public@routeur.m-ripoll.com --output /etc/mrtg/webmin.cfg ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits EnableIPv6: no WorkDir: /var/www/html/mrtg/routeur Language: french Options[_]: bits,growright ###################################################################### # System: Linksys # Description: Linux WRT54GL 2.4.35 #1824 Wed Jan 2 02:15:57 CET 2008 mips # Contact: mike@m-ripoll.com # Location: Smh ###################################################################### ### Interface 1 >> Descr: 'lo' | Name: '' | Ip: '127.0.0.1' | Eth: '' ### ### The following interface is commented out because: ### * it is a Software Loopback interface #Target[routeur.m-ripoll.com_1]: 1:public@routeur.m-ripoll.com: #SetEnv[routeur.m-ripoll.com_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo" #MaxBytes[routeur.m-ripoll.com_1]: 1250000 #Title[routeur.m-ripoll.com_1]: lo -- Linksys #PageTop[routeur.m-ripoll.com_1]:

lo -- Linksys

#
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
System:Linksys in Smh
Maintainer:mike@m-ripoll.com
Description:lo
ifType:softwareLoopback (24)
ifName:
Max Speed:100.0 Mbits/s
Ip:127.0.0.1 (localhost)
#
### Interface 2 >> Descr: 'teql0' | Name: '' | Ip: '' | Eth: '' ### ### The following interface is commented out because: ### * it is administratively DOWN ### * it is operationally DOWN ### * has a speed of 0 which makes no sense # # Target[routeur.m-ripoll.com_2]: 2:public@routeur.m-ripoll.com: # SetEnv[routeur.m-ripoll.com_2]: MRTG_INT_IP="" MRTG_INT_DESCR="teql0" # MaxBytes[routeur.m-ripoll.com_2]: 0 # Title[routeur.m-ripoll.com_2]: teql0 -- Linksys # PageTop[routeur.m-ripoll.com_2]:

teql0 -- Linksys

#
# # # # # # # # # # # # # # # # # # # # # # # # # # #
System:Linksys in Smh
Maintainer:mike@m-ripoll.com
Description:teql0
ifType:Other (1)
ifName:
Max Speed:0.0 bits/s
#
### Interface 3 >> Descr: 'eth0' | Name: '' | Ip: '' | Eth: '' ### #Target[routeur.m-ripoll.com_3]: 3:public@routeur.m-ripoll.com: #SetEnv[routeur.m-ripoll.com_3]: MRTG_INT_IP="" MRTG_INT_DESCR="eth0" #MaxBytes[routeur.m-ripoll.com_3]: 1250000 #Title[routeur.m-ripoll.com_3]: eth0 -- Linksys #PageTop[routeur.m-ripoll.com_3]:

eth0 -- Linksys

#
# # # # # # # # # # # # # # # # # # # # # # # # # # #
System:Linksys in Smh
Maintainer:mike@m-ripoll.com
Description:eth0
ifType:ethernetCsmacd (6)
ifName:
Max Speed:100.0 Mbits/s
#
# ### Interface 4 >> Descr: 'eth1' | Name: '' | Ip: '' | Eth: '00-1d-7e-43-b5-ca' ### Target[routeur.m-ripoll.com_6]: 6:public@routeur.m-ripoll.com: SetEnv[routeur.m-ripoll.com_6]: MRTG_INT_IP="" MRTG_INT_DESCR="eth1" MaxBytes[routeur.m-ripoll.com_6]: 1250000 Title[routeur.m-ripoll.com_6]: eth1 -- Linksys PageTop[routeur.m-ripoll.com_6]:

WLAN -- Linksys

System: Linksys in Smh
Maintainer: mike@m-ripoll.com
Description: eth1
ifType: ethernetCsmacd (6)
ifName:
Max Speed: 100.0 Mbits/s
### Interface 7 >> Descr: 'vlan0' | Name: '' | Ip: '' | Eth: '' ### Target[routeur.m-ripoll.com_7]: 5:public@routeur.m-ripoll.com: SetEnv[routeur.m-ripoll.com_7]: MRTG_INT_IP="" MRTG_INT_DESCR="vlan0" MaxBytes[routeur.m-ripoll.com_7]: 1250000 Title[routeur.m-ripoll.com_7]: vlan0 -- Linksys PageTop[routeur.m-ripoll.com_7]:

LAN -- Linksys

System: Linksys in Smh
Maintainer: mike@m-ripoll.com
Description: vlan0
ifType: ethernetCsmacd (6)
ifName:
Max Speed: 100.0 Mbits/s
### Interface 8 >> Descr: 'vlan1' | Name: '' | Ip: '82.67.65.171' | Eth: '00-1d-7e-43-b5-c9' ### Target[routeur.m-ripoll.com_8]: 8:public@routeur.m-ripoll.com: SetEnv[routeur.m-ripoll.com_8]: MRTG_INT_IP="82.67.65.171" MRTG_INT_DESCR="vlan1" MaxBytes[routeur.m-ripoll.com_8]: 1250000 Title[routeur.m-ripoll.com_8]: WAN -- Linksys PageTop[routeur.m-ripoll.com_8]:

WAN -- Linksys

System: Linksys in Smh
Maintainer: mike@m-ripoll.com
Description: vlan1
ifType: ethernetCsmacd (6)
ifName:
Max Speed: 100.0 Mbits/s
Ip: 82.67.65.171 (dns1.m-ripoll.com)
### Interface 10 >> Descr: 'br0' | Name: '' | Ip: '192.168.1.254' | Eth: '' ### Target[routeur.m-ripoll.com_10 ]: 10:public@routeur.m-ripoll.com: SetEnv[routeur.m-ripoll.com_10]: MRTG_INT_IP="192.168.1.254" MRTG_INT_DESCR="br0" MaxBytes[routeur.m-ripoll.com_7]: 1250000 Title[routeur.m-ripoll.com_7]: br0 -- Linksys PageTop[routeur.m-ripoll.com_7]:

br0 -- Linksys

System: Linksys in Smh
Maintainer: mike@m-ripoll.com
Description: br0
ifType: ethernetCsmacd (6)
ifName:
Max Speed: 100.0 Mbits/s
Ip: 192.168.1.254 (routeur.m-ripoll.com)
# ### Interface 10 >> Descr: '' | Name: '' | Ip: '169.254.255.1' | Eth: '' ### ### The following interface is commented out because: ### * has a speed of which makes no sense ### * got 'Received SNMP response with error code ### error status: noSuchName ### index 1 (OID: 1.3.6.1.2.1.2.2.1.10.10) ### SNMPv1_Session (remote host: "routeur.m-ripoll.com" [192.168.1.254].161) ### community: "public" ### request ID: 136443663 ### PDU bufsize: 8000 bytes ### timeout: 2s ### retries: 5 ### backoff: 1)' from interface when trying to query # # Target[routeur.m-ripoll.com_10]: 10:public@routeur.m-ripoll.com: # SetEnv[routeur.m-ripoll.com_10]: MRTG_INT_IP="169.254.255.1" MRTG_INT_DESCR="" # MaxBytes[routeur.m-ripoll.com_10]: 0 # Title[routeur.m-ripoll.com_10]: 10 -- Linksys # PageTop[routeur.m-ripoll.com_10]:

10 -- Linksys

#
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
System:Linksys in Smh
Maintainer:mike@m-ripoll.com
Description:
ifType: ()
ifName:
Max Speed:0.0 bits/s
Ip:169.254.255.1 ()
#